New RAB energy-saving LED products!

Outdoor

Floodlights

X17 FA
• Field-adjustable color temperature
• Selectable on/off photocell
• Available in 6 lumen package
• Wide 7H x 6V NEMA distribution

X17 XFU
• Field-adjustable color temperature and lumen output
• Selectable on/off photocell
• Wide 7H x 6V NEMA distribution

X34
• General purpose floodlight with wide 7H x 7V distribution
• Low profile and lightweight
• Replaces up to 1,000W MH

Wall Packs

WP123 XFU
• Traditional-look wall pack with 3-way field adjustability: 3 selectable wattages, 3 selectable color temperatures, and on/off photocell

SLIM17 FA Adjustable
• Fully adjustable cut off, from full cutoff up to 90° in 15° increments
• Field-adjustable color temperature
• Integrated photocell

SLIM17 FA Full Cutoff
• Field-adjustable color temperature
• Selectable on/off photocell
• Full cutoff design is Dark Sky friendly

Entry Light

BRISK17 FA
• Field-adjustable color temperature
• Covers the footprint of most traditional tallpacks
• Integrated photocell

Indoor

Flat Panel

EZPAN FA
• Field-adjustable light output and CCT (3 discrete steps)
• Low profile is ideal for shallow plenums
• 0-10V dimming standard on all models
• Battery backup available

Center Basket

SWISH FA
• Field-adjustable light output and CCT (3 discrete steps)
• High-reflectance, powder-coated finish
• IC Rated for direct contact with insulation
• Accessories for surface or recessed mounting

Washdown

SEAL
• Available in 3 lengths
• Field-adjustable CCT and wattage
• IP66 Rating, NSF rated, NEMA 4X rated, and UL 94-5VA classified

Downlights

Gimbal & Deep Regress
• 2” Downlight provides small-aperature aesthetic
• Deep regress models eliminate glare
• Gimbals available in 2”, 3” and 4” models
• 90 CRI for accurate color rendering
• Dimmable with most TRIAC dimmers (120V)

CCT-Selectable Wafers
• 5 selectable color temperatures (2700K, 3000K, 3500K, 4000K, 5000K)
• Available in 3", 4", 5", 6" and 8" models
• Offered with either smooth or baffle trim
• Off-board driver minimizes installation height
• 90 CRI for accurate color rendering

Temp Work Lights

TEMP
• Retractable handle
• Omnidirectional 360° light coverage
• Female receptacle for easy daisy chaining

Dimmable A19
• Replace incandescent & halogen bulbs
• Frosted lens produces smooth, diffuse light
• Dimmable down to 10%
• Available with E26 or GU24 base

T8 Type A/B Hybrid
• Can be used on existing ballasts or wired directly to line voltage
• Replace conventional fluorescent T8 tubes
• Can be wired either single or double-ended

 

Residential Applications

Safety & Comfort for the Home

• Pipe freeze protection systems are flexible and easy to attach.
• Both FrostGuard and WinterGard series protection are made to withstand dry and wet locations.
• Roof and gutter de-icing systems protect from ice dams, heavy snow build-up, and icicles
• Surface snow melting systems keep sidewalks, stairways and driveways free of snow and ice.
• Electric floor heating systems offer the comfort of a warm floor that is maintenance-free for your customers.

Commercial Applications

Commercial Heat Tracing Solutions

• Pipe freeze protection systems prevent freezing, bursting, and water damage.
• Grease waste flow maintenance keeps the fat, oil, and grease mixtures in suspension from the kitchen to the interceptor.
• Roof and gutter de-icing systems are ideal for modern membrane roofs and keeping roof drains free of snow and ice.
• Surface snow melting systems provide constant heat to make even suspended stairwells and parking garages safe from ice.
• Hot water temperature maintenance systems help save water by ensuring a quick, constant source of hot water.
• Freezer frost heave protection includes solutions for both large and small coolers and freezers.

NUHEAT Floor Warming

Floor Heating Products for Every Application

• Custom mats for complex shapes and sharp angles.
• Standard mats for easy and fast installation.
• Floor heating cable for on-site flexibilty.
• Cable & Membrane for flexibility and adjustable heat.
• Mesh for both on-site flexibility and fast installation.

NUHEAT Thermostats

NVENT NUHEAT SIGNATURE

• Wifi-enabled.
• iOS® and Android® apps.
• Works with Amazon Alexa®, Google Assistant®, IFTTT®, and more.
• Open API for custom integrations.
• Displays live local weather forecast.
• Includes all of the functions of the nVent NUHEAT Home thermostat.

NVENT NUHEAT HOME

• 3.5” color touchscreen.
• 7-day programmability.
• Energy-use monitor.

Project Services

Proposals & Estimates
Consultation to develop Electric Heat Trace scope, applications, and outline required engineering deliverables.

Project Management
Manage design, supply, and installation services as well as the procurement, buy-outs, and delivery of materials.

Engineering & Design
Service teams available for custom layout drawings, on-site field engineering, and performance optimization.

Construction / Installation
Installation of heat trace products, power distribution, and control wiring, as well as on-site supervision.

Field Support
Commissioning/start-up assistance, troubleshooting,
repair, audits, training, and after market technical or field
support as needed.

Nora Lighting’s new distribution center in Edison, NJ, cuts lead times and delivery to next day for select items. Pick up items the same day from Swift Electrical Supply’s extensive inventory. Our network of four facilities can fulfill any order. Our partnership with NORA LIGHTING provides unmatched local access and FAST order fulfillment. Ask your Swift salesperson for more details

IN STOCK AT SWIFT!

E-SERIES FLIN / 4” & 6” CANLESS LED DOWNLIGHTS
(NEFLINTW-R4233MPW & NEFLINTW-R6MPW)

• Round or Square Aperture / Selectable CCT
• FLIN Wafer can-less downlights require no recessed housing
• Simple and easy installation – ideal for new construction and remodel jobs
• Each fixture includes a dedicated junction box to accept 120V or 120-277V input
• IC Air-tight rated downlights deliver up to 1300 lumens
• Tunable White LED technology that allows the end user to select color temperature (CCT) from 2700K/3000K/3500K/ 4000K/5000K
• Available in two sizes (4” & 6”) and round or square
• Triac or ELV dimming
• Approved for wet locations

CLICK HERE for more information

ONYX LED RTW SERIES TUNABLE WHITE RETROFIT DOWNLIGHTS
(NOXTW-432WW & NOXTW-5632WW)

• Perfect solution for existing or new recessed housing
• 4” and 5”/6” apertures delivering up to 1150 lumens
• Tunable White LED technology that allows the end user to select color temperature (CCT) from 2700K / 3000K / 3500K / 4000K / 5000K
• Approved for wet locations

CLICK HERE for more information

ALL PRODUCTS IN STOCK!

3M™ Fire Barrier Rated Foam FIP 1-Step
Designed to expand up to 5 times in volume after dispensing, This intumescent foam can be used to fill the annular space created by pipes and cables penetrating through fire-rated construction
Firestop tested and rated up to 2 hours in accordance with ASTM E814 (UL 1479) and CAN/ULC-S115
Re-enterable and repairable foam remains pliable after installation
Excellent adhesion and does not require backing material in wall or floor applications

3M™ Fire Barrier Composite Sheet CS-195+
Four component intumescent system is ideal firestop solution for larger penetrations such at cable trays and conduit
Forms effective intermittent fire-break within horizontal & vertical cable tray runs
Hard char material tightly seals penetrations against flame spread, smoke, and toxic gasses
Easy to cut, form, and install using ordinary tools

3M™ Fire Barrier Blocks, Planks, and Plugs –
A Better Way to Fill Large Gaps
Fills large gaps quickly while restoring wall integrity with simple “stack, seal, and done” application
Engineered to remain securely in place without wire mesh reinforcements
Pre-formed blocks fill large openings quickly – saving time and money
Material is easy to trim onsite without special tools, achieving a precise fit, without cure time
Material is paintable with primer for a more seamless appearance
Blocks are re-enterable and reusable minimizing waste and saving money
Combine with 3M™ Fire Barrier Rated Foam FIP 1-Step to easily seal openings

DESCRIPTION OF OUR SERVICES:
The Swift/3M team can help with system selection, training & certification and walkthroughs on the jobsite. Our full service approach and robust inventory levels will make it easy to add firestopping into your scope of work.

The Swift Electrical Supply – 3M™ Team
Delivering Unmatched Support
From Understanding Your Project Needs to Providing the Solution
Providing local best-in-class product support with inventory in-stock
Project consultations and needs assessments
Jobsite walkthroughs and certified application training
Specialized Firestop Training Available / 3M™ AIA Lunch and Learn Program
We offer AIA accredited firestopping product training if your company requires continuing education credits.

 

Werner Safety Above All

We’re proud to partner with Werner, the industry pros dedicated to jobsite safety through superior products and training. Now available through Swift Electrical Supply, a complete range of fall protection products to keep your team safe and compliant.

• Harnesses
• Retractables
• Anchorage Connectors
• Leading Edge Solutions
• Horizontal & Vertical Lifelines
• Compliance Kits
• Confined Space Gear
• Drop Safety Equipment

Blue Armor H212002 Standard (Back D-Ring) Harness

• Built in Relief Handles provide immediate relief after a fall arrest allowing you to reach a gravity override seated position
• WebAlert™ inspectable webbing makes wear and damage visible and obvious, and with multiple impact indicators, makes inspection easier
• Lightweight, form fitting padding with breathable compression interior is designed to protect user and prevent tangling when donning
• Slotted pass through buckles on the chest strap fastens without twisting
• Tongue buckle leg straps are ideal when multiple workers use the same harness
• 5-point adjustments for optimal fit
• Meets ANSI z359.11 Standard for Full Body Harnesses

Werner ProForm™ F3 H012002 Standard Harness with Tongue Buckle Leg

• Lightweight, athletic design and materials deliver maximum comfort without compromising safety
• Dual-Back pad system provides cooling airflow and breathability and can be repositioned after a fall to reduce pressure on the clavicle
• New WebAlert™2 inspectable webbing makes wear or damage clearly visible and contains a weather-resistant coating
• Aluminum Quick Connect buckles include green indicator for visual sign of proper engagement
• Focused padding minimizes weight and bulk, while inner compression layer reduces contact points and promotes airflow
• Meets ANSI z359.11 Standards for Full Body Harnesses
  H012002 | Harnesses | Werner US (wernerco.com)

---

In Stock at Swift Electrical Supply
and available for next day delivery.

I-Beam Fixed Anchor PT #A460000
Reusable Concrete Anchor, ¾ Hole #A510000
Swivel Reusable Anchor, ¾ Hole #A51001
I-Beam Slide Anchor Point #A550000
22” Rebar Positioning Chain Lanyard w/Hook #C191204
6’ Softcoil Lanyard #C351100
6’ Softcoil Twin Leg Lanyard #C451100
6’ Softcoil Twin Leg Lanyard w/Rebar Hooks #C451200
Proform F3 Standard Harness, M/L #H012002
Blue Armor 1000 Harness, M/L #H212002
Blue Armor 1000 Harness, XL #H212004
Litefit Standard Harness, M/L #H312002
Litefit Standard Harness, XL #H312004
Litefit Positioning Harness, M/L #H332002
Arial Kit Compliance in a Bag #K122023
100’ Vertical Lifeline #L201100
Max Patrol 20’ Self-Retracting Lifeline #R410020
Max Patrol 11’ Self-Retracting Lifeline #R430011
Max Patrol 11’ Self-Retracting Lifeline w/Rebar Hook #R430011R
Trauma Relief Strap #T320000
18’ Rescue Ladder #T340018

 

PEDESTAL POSTS

NEMA 3R Listed Raceways

Serve power to 99% of all common rooftop equipment

• NEWA 3R Listed raceway
• Stand-alone design, no extra bracing required
• Only ONE roof penetration per post – minimizes potential impact of rooftop integrity
• Route all conduit below roof line – improved structural integrity and roof appearance
• Saves Time – Ideal for off-site prefabrication

General Specifications:

Stand Material: 13 Gauge Steel
Base Material: 3 Gauge Steel
Finish: Gray Powder Coated Electroplated Zinc

• Base Includes installation instructions and 4-pack of 1/4” – 20 bolts for assembling stand
• Base features four holes – for 3/8” anchor bolts or stud anchors (not included)
• Base & Stand sold separately

ALL PRODUCTS IN STOCK!

3M™ Fire Barrier Rated Foam FIP 1-Step
Designed to expand up to 5 times in volume after dispensing, This intumescent foam can be used to fill the annular space created by pipes and cables penetrating through fire-rated construction
Firestop tested and rated up to 2 hours in accordance with ASTM E814 (UL 1479) and CAN/ULC-S115
Re-enterable and repairable foam remains pliable after installation
Excellent adhesion and does not require backing material in wall or floor applications

3M™ Fire Barrier Composite Sheet CS-195+
Four component intumescent system is ideal firestop solution for larger penetrations such at cable trays and conduit
Forms effective intermittent fire-break within horizontal & vertical cable tray runs
Hard char material tightly seals penetrations against flame spread, smoke, and toxic gasses
Easy to cut, form, and install using ordinary tools

3M™ Fire Barrier Blocks, Planks, and Plugs –
A Better Way to Fill Large Gaps
Fills large gaps quickly while restoring wall integrity with simple “stack, seal, and done” application
Engineered to remain securely in place without wire mesh reinforcements
Pre-formed blocks fill large openings quickly – saving time and money
Material is easy to trim onsite without special tools, achieving a precise fit, without cure time
Material is paintable with primer for a more seamless appearance
Blocks are re-enterable and reusable minimizing waste and saving money
Combine with 3M™ Fire Barrier Rated Foam FIP 1-Step to easily seal openings

DESCRIPTION OF OUR SERVICES:
The Swift/3M team can help with system selection, training & certification and walkthroughs on the jobsite. Our full service approach and robust inventory levels will make it easy to add firestopping into your scope of work.

The Swift Electrical Supply – 3M™ Team
Delivering Unmatched Support
From Understanding Your Project Needs to Providing the Solution
Providing local best-in-class product support with inventory in-stock
Project consultations and needs assessments
Jobsite walkthroughs and certified application training
Specialized Firestop Training Available / 3M™ AIA Lunch and Learn Program
We offer AIA accredited firestopping product training if your company requires continuing education credits.

 

Product Description and Features
WhisperSense® DC™ Precision Spot Ventilation fan with built-in Dual Sensor Technology (Motion & Moisture) for automatic moisture and odor control.

Features Pick-A-Flow™ speed selector switch to select required airflow (50-80-110 CFM) and ECM Motor with SmartFlow® technology for optimum performance.

Can be used to comply with the latest codes and standards.

• Precision spot ventilation fans ideal for use in the bathroom, laundry room, mud room, basement or garage
• Revolutionary ECM motor with SmartFlow™ technology for optimum CFM output
• Pick-A-Flow Speed Selector (50-80-110 CFM) combined with SmartFlow™ Technology simplifies the selection process and ensures optimum performance to meet code and reduce callbacks
• Dual Sensor Technology (Motion & Moisture) provides built-in redundancy for the ultimate in automatic moisture and odor control
• Flex-Z Fast bracket provides flexible, fast & trouble-free installation, even from below the ceiling

Additional Benefits:

• Hassle-free installation features like an integrated 4” or 6” dual duct adapter
• UL listed for tub/shower enclosure when GFCI protected
• Auto shut off feature saves energy and further reduces operating costs
• Built-in damper and metal flange provides blocking for penetrations through drywall as an Air Barrier, decreases leakage in the Building Envelope during blower door testing
• Warranty: 6 years ECM Motor, 5 years LED, 3 years all other parts

ECM Motor with SmartFlow™ Technology WhisperSense® DC™ is designed to perform as rated. When the fan senses static pressure, its speed is automatically increased to ensure optimal CFM output. This feature provides peace of mind, as the installer doesn’t have to worry about compromising the fan’s performance, even with a complicated duct run. Pick-A-Flow Speed Technology Built-in Pick-A-Flow speed selector provides the unique ability to select your required airflow (50-80-110 CFM) with the simple flip of a switch.

The power of performance, with exclusive smart sensing technology ECM Motor with SmartFlow™ Technology WhisperSense® DC™ is designed to perform as rated. When the fan senses static pressure, its speed is automatically increased to ensure optimal CFM output. This feature provides peace of mind, as the installer doesn’t have to worry about compromising the fan’s performance, even with a complicated duct run. Pick-A-Flow Speed Technology Built-in Pick-A-Flow speed selector provides the unique ability to select your required airflow (50-80-110 CFM) with the simple flip of a switch. Three ways the fan can function • Motion on/Motion off • Motion on/Humidity off • Humidity on/Humidity off • Variable humidity controls from 30-80% Relative Humidity (RH) • Adjustable delay timer from 30 seconds to 60 minutes LED Lighting WhisperSense® DC™ fan/light models feature a contemporary flush mount grille.

The Industry’s Most Intelligent Residential Circuit Breaker System

The Leviton Load Center

With a focus on improved safety, revolutionary design and ease of installation, Leviton takes the load center into the 21st century. THE FUTURE MADE CURRENT.

What’s a Smart Home Without a Smart Circuit Breaker?

Your customers are seeking out new and innovative smart-home products. You can upgrade the entire panel or just one circuit at a time by installing smart circuit breakers. Using the intuitive My Leviton app, your homeowner
customer can enjoy easy access to essential elements of their load center’s data, right from their smartphone.
Big time benefits for your customer include:

Energy Use

• View real-time energy consumption or trends by day, week, month, and year
• Helps your customer calculate their approximate total energy cost per month

Control

• Allows for remote turn OFF of any smart circuit breaker
• View system status in real time and detect if critical loads need to be addressed

Alerts and Updates

• Know when and why a circuit breaker trips
• Be informed if a load is ON or not drawing power for an extended time

Swift has the products and the expertise you need for medium voltage. Whether it’s time-saving splice kits, termination kits, or cold shrink products, we have you covered.

3M™ Cold Shrink Shielded Splice Kits
For splicing 5 kV and 8 kV shielded, solid dielectric, power cables. Meets requirements of IEEE 404. Each kit contains all the materials (except connectors and optional ground strap) required to construct three (3) single conductor splices on Tape Shield, Wire Shield or UniShield® cables. Note: The kit can also be used to splice a shielded to a non-shielded 5/8 kV cable.

3M™ Cold Shrink Rubber Splice Kit
5551
Ideal for splicing 3/C, 5/8 kV shielded, armored and non-armored cables. Conductor sizes 6-4/0 AWG, Cu.

3M™ Cold Shrink Splice Kit
5552
Provides splicing on tape/wire/Unishield, 5/8 kV applications. Conductor sizes 4/0AWG-500kcmil, Cu.

3M™ Cold Shrink QS4 Integrated Splice
QS4-15SP-2-4/0-BCA

3M™ Cold Shrink QS4 Integrated Splice
QS4-15SP-QCI-4/0-500-BCA

Medium Voltage Termination Kits
• Provides a void-free seal to tape shield, wire shield and UniShield® power cables
• High dielectric-constant material regulates the distribution of electric field stress
• Suitable for indoor applications
• Silicone rubber insulation offers durability and reduces leakage currents in damp conditions

3M™ Cold Shrink QT-III Termination Kit
7622-T-110, Tape/Wire/UniShield® Shielding, 5-15 kV, Insulation OD 0.64-1.08 in, 3/kit

3M™ Cold Shrink QT-III 3/C Termination Kit
7623-T-110, Tape/Wire/UniShield®, 5-15kV, Insulation OD 0.72-1.29 in, 3/kit

3M™ Cold Shrink QT-III 3/C Termination Kit
7624-T-110, Tape/Wire/UniShield®, 5-15 kV, Insulation OD 0.92-1.18 in, 3/kit

3M™ Cold Shrink QT-III 3/C Termination Kit
7625-T-110, Tape Shielded, 5-15 kV, Insulation OD 1.18-1.51 in, 3/kit

 

Trusted Everywhere Work Gets Done

Featured Products

• WER A100301 3/4 Carabinners
• WER A111104 4ft Cross Arm Anchor Point
• WER A111106 6ft Cross Arm Anchor Point
• WER A510000 Reusable Concrete Anchor 3/4 Hole
• WER A510001 Swivel Reusable Anchor 3/4 Hole
• WER A550000 I-Beam Slide Anchor Point
• WER C311100 6ft Decoil Lanyard
• WER C411100 6ft Decoil Twin Leg Lanyard
• WER C411200 6ft Decoil Twin Leg Lanyard w/ Rebar Hooks
• WER H112002 Blue Armor 2000 M/L Harness
• WER H112004 Blue Armor 2000 XL Harness
• WER H212002 Blue Armor 1000 M/L Harness
• WER H212004 Blue Armor 1000 XL Harness
• WER H412002 Basewear Harness With Tongue Buckle Straps
• WER K121013 Aerial Kit Standard Harness & 6ft Decoil Lanyard
• WER L201100 100ft Verticle Lifeline
• WER R330010 10ft Self Retracting Lifeline Max Patro

Construction Drilling and Cutting Solutions

Featured Products

• ITM 3100BP SDS BULL POINT CHISEL
• ITM 3110FC 3/4X10 SDS FLAT CHISEL
• ITM 3115SC 1-1/2 SDS SCALING CHISEL
• ITM 715S41264 3/16 X 4-1/2 SDS
• ITM 715S41264-B 3/16 X 4-1/2 25PK
• ITM 715S41664-B 1/4 X 4-1/2 25PK
• ITM 715S61064 5/32 X 6-1/4 SDS
• ITM 715S61264-B 3/16 X 6-1/4 25PK
• ITM 715S61464 7/32 X 6-1/4 SDS
• ITM 715S61664-B 1/4 X 6-1/2 25PK
• ITM 715S62064 5/16 X 6-1/2 SDS
• ITM 715S62464-B 3/8 X 6-1/2 25PK
• ITM 715S63264-B 1/2 X 6-1/2 25PK
• ITM 715S63664 9/16 X 6-1/4 SDS
• ITM 715S84064 5/8 X 8-1/4 SDS
• ITM 715S84864 3/4 X 8IN SDS BIT
• ITM 715S85664 7/8 X 8IN SDS BIT
• ITM ARB-1 1/4IN HEX SHANK ARBOR
• ITM ARB-3 3/8IN HEX SHANK ARBOR
• ITM HF0014 3/4 TCT HOLE CUTTER
• ITM HF0016 7/8 TCT HOLE CUTTER
• ITM HF0019 1-1/8 TCT HOLE CUTTER
• ITM HF0023 1-3/8 TCT HOLE CUTTER
• ITM HF0028 2IN TCT HOLE CUTTER
• ITM HF-PILOT CENTER DRILL